SUNsuSEA specification
SUNsuSEA, Oyster 46/22
Designer - Rob Humphreys with Oyster Design Team
Registration POL 8906
Call sign SPG 3268
MMSI 261016090
Port of call GDAŃSK
| Dimensions | |
| Length overall | 14.26 m (46' 10") including pulpit |
| Length of hull | 13.94m (46' 9") |
| Length of waterline | 12.36 m (40' 7") |
| Beam | 4.41 m (14' 6") |
| Draft HPB keel (standard) | 2,16 m |
| Rig and spar type | Masthead sloop with fully battened main |
| Ballast keel type | High Performance Bulb (HPB) |
| Ballast | 5,400 kg (11,900 lb) |
| Displacement | 17,500 kg (38,580 lb) |
| Engine | Yanmar 4JH4- TE, 56kw (75hp), shaft |
| Tanks (fuel) | 750 l (198 gal) |
| Tanks (water) | 650 l (172 gal) |
| Sail Area | 120.1 sq. m (1,293 sq. f) with 150% foretriangle |
| Air Draft height of mast | 19.03 m (62' 5") including antennas: 20.1 m (65' 11") |
| Sail area/ displacement ratio | 17.65 |
| Displ/lenght waterline ratio | 258 |
| Pounds per inch immersion | 1895 |
| Construction | |
| Hull and deck construction | Hand lay-up GRP hull and deck |
| Outer hull | Laminate in Vinylester resin |
| Hull | Hull style lines – 1x cove and 2x boot top lines |
| Antifoul | 2 coats International antifouling paint Micron 77 blue |
| Keel | High Performance Bulb external lead keel |
| Rudder | Fully protected skeg-hung rudder |
| Design | EURCD Design Category ‘A’ Ocean |
Oyster 46 Polar characteristics standard keel
